Ingersoll Rand Power Screwdriver 1R User Manual

16574550  
Edition 1  
January 2006  
Air Screwdrivers  
1R Series  
Parts Information  
Save These Instructions  
 
1R Screwdriver Motor Housing Assemblies Parts List  
Item Part Description  
Motor Housing Assembly  
for 1RA models  
Part Number Item Part Description  
Part Number  
(for 1RL Models ending in S1 or S3)  
13F Throttle Valve Housing Cap Screw Lock  
Washer (4) (for 1RL Models  
ending in S1 or S3)  
3RL-510  
3RA-EU-A40  
3RL-EU-A40  
for 1RL models ending in  
C1-, C3-, 9D- or D1-  
for 1RL models ending in  
S1- or S3-  
3RL-511  
8U-722  
3RP-51  
13G Throttle Ball  
3RLS-EU-A40  
3RP-EU-A40  
3RT-EU-A40  
(for 1RL Models ending in S1 or S3)  
13H Throttle Ball Spring (for 1RL  
Models ending in S1 or S3)  
14 Throttle Ball Spring  
for 1RP models  
for 1RT models  
1
Motor Housing  
for 1RA and 1RT models  
for 1RL models ending in  
C1-, C3-, 9D- or D1-  
3RA-EU-B40  
3RL-EU-B40  
for 1RP Models  
3RP-51  
3RT-51  
8U-722  
3RL-210  
for 1RT Models  
15 Throttle Ball (for 1RP and 1RT Models)  
for 1RL models ending in  
S1- or S3-  
†• 16 Housing Seal (for 1RA and 1RT Models)  
†• 17 Muffler Element  
3RLS-EU-B40  
3RP-EU-B40  
for 1RP models  
for 1RA and 1RT Models  
3RA-310  
3RL-311  
1A  
Valve Housing Alignment Pin (for  
1RL Models ending in S1 or S3)  
Reverse Valve  
for 1RL and 1RP Models (4)  
18 Muffler Assembly  
3RL-15  
2
2A  
3
3RL-329  
(for 1RA and 1RT Models)  
3RA-A123  
85H-167  
Reverse Valve Seal  
WFS182-307  
SPA102R-515  
SPA102R-667  
SPA102R-669  
3RL-668  
†• 18A  
Muffler O-Ring  
Reverse Valve Spring  
†• 18B Exhaust Deflector Seal  
(for 1RL and 1RP Models)  
4
Valve Lock Pin  
3RL-210  
3RP-23  
5
Retainer Setscrew  
19  
Exhaust Deflector (for 1RP Models)  
6
Lock Pin Retainer  
Exhaust Deflector Assembly  
(for 1RL Models)  
6A  
Throttle Valve Housing  
(for 1RL Models ending in S1 or S3)  
Throttle Valve Spring  
3RL-A23  
3RL-23  
3RL-503  
20  
21  
22  
23  
Exhaust Deflector  
†•  
7
8
Throttle Lever Pin (2)  
Throttle Lever  
3RL-120  
3RL-273  
for 1RA and 1RT Models  
for 1RL Models  
3RA-51  
3RL-51  
Trigger Assembly  
Throttle Valve  
(for 1RA and 1RT Models)  
Trigger Pin Seal  
3RA-A93  
8SL-259  
(for 1RA and 1RT Models)  
Valve Seat (for 1RA and 1RT Models)  
Valve Seat Support  
7RAK-302  
7RAK-303  
†• 23A  
24  
†•  
9
Back Cap Assembly  
(for 1RA and 1RT Models)  
Back Cap O-Ring  
10  
3RA-A202  
AF120-290  
R0A2-61  
(for 1RA and 1RT Models)  
Throttle Valve Plunger  
7RAK-304  
†• 24A  
11  
25  
26  
27  
28  
Inlet Screen (for 1RA and 1RT  
Models)  
(for 1RL Models)  
3RL-302  
3RL-266  
4U-722  
12  
13  
Throttle Valve Cap (for 1RL Models)  
Throttle Valve Ball (for 1RL Models)  
Throttle Valve Housing Adapter  
(for 1RL Models ending in S1 or S3)  
Throttle Valve Housing Adapter Seal  
(for 1RL Models ending in S1 or S3)  
Inlet Bushing  
(for 1RA and 1RT Models)  
Inlet Bushing Spacer  
(for 1RA and 1RT Models)  
Inlet Bushing Assembly  
(for 1RL and 1RP Models)  
Inlet Screen  
3RA-465  
3RA-65  
13A  
3RL-502  
PS3-67  
3RL-15  
3RL-210  
13B  
3RL-A465  
3RL-61  
13C Exhaust Deflector Alignment  
Pin (for 1RL Models ending in S1 or S3)  
13D Throttle Valve Housing Seal  
28A  
*
Warning Label  
WARNING-28-99  
28B  
Seat (for 1RL Models ending in S1 or  
S3 and all 1RA and 1RT Models)  
Nameplate  
(for 1RL Models ending in S1 or S3)  
13E Throttle Valve Housing Cap Screw (4)  
3RP-303  
28C  
04725032  
* Not illustrated.  
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part  
indicated by a bullet (•) for every four tools in service.  
† Indicates Tune-up Kit part.  
16574550_ed1  
3
 
1R Motor and Gearing Exploded Diagram  
(Dwg. TPA1858)  
4
16574550_ed1  
 
1R Motor and Gearing Parts List  
Item Part Description  
29 Rotor  
Part Number Item Part Description  
Part Number  
3RLM-108  
3RLN-108  
3RL-6  
for M ratio  
for 1RP and 1RT Models  
and 1RL Models ending in S1 or S3  
for 1RA Models and 1RL  
Models ending in C1, C3, 9D or D1  
30 Front End Plate  
for N or Q ratios  
3RP-53  
44 Spindle Retaining Ring  
45 Rotor Pinion (for M, N or P ratios)  
46 Gear Head Spacer (for M, N and Q ratios)  
47 Gear Head  
3RLM-17  
3RL-53  
3RL-11  
3RL-80  
31 Rear End Plate  
for M ratio  
3RLM-216  
3RLN-216  
3RLQ-216  
for 1RP, 1RT, 1RA and 1RL  
Models  
for N and P ratios  
3RL-12  
3RPP-12  
DG10-22  
8SL-305  
3RL-13  
for Q ratio  
for 1RP and 1RTP Models  
†• 32 Rotor Bearing (2)  
48 Gear Head Planet Gear (3)  
for M, N and ratios (14 teeth)  
for Q ratio (19 teeth)  
3RLM-10  
3RLL-10  
3RL-207  
3RL-208  
33 Rear Rotor Bearing Retainer  
34 Front Rotor Bearing Retainer  
35 Vane Packet (set of 5 Vanes)  
36 Cylinder  
49 Motor Clamp Washer  
50 Clamp Washer Retaining Ring  
3RL-42-5  
3RL-3  
*
Suspension Bail  
37 Cylinder Dowel  
3RL-98  
(for Models 1RL and 1RP)  
7L-365  
3RA-365  
3RP-747  
3RL-284  
†• 38 Rear End Plate Gasket  
39 Gear Case Assembly  
for L ratio  
3RL-739  
*
*
*
*
Hanger (for Models 1RA and 1RT)  
Hand Grip (for Models 1RL and 1RP)  
Exhaust Hose (for Models 1RL and 1RP)  
Tune-up Kit for 1RA and 1RT Models  
(includes illustrated parts 7, 8, 9, 14, 16,  
17, 18A, 23A, 24A, 25, 32, 33, 34,  
35 and 38)  
3RLL-A37  
3RLM-A37  
R00A-510  
3RL-28  
for M, N and Q ratios  
Spindle Bearing  
Spindle Bearing Retainer  
40  
41  
42 Spindle Planet Gear (3)  
for L ratio (19 teeth)  
3RA-TK2  
3RLL-10  
3RLM-10  
3RLN-10  
*
*
Tune-up Kit for 1RL and 1RP Models  
(includes illustrated parts 7, 14, 17, 18B,  
28A, 32, 33, 34, 35, and 38)  
for M ratio (14 teeth)  
for N and Q ratios (17 teeth)  
3RL-TK2  
3RL-565  
43 Spindle  
Inlet Bushing (1/4" NPT) (for 1RL  
and 1RP Models only)  
for L ratio  
3RLL-108  
* Not illustrated.  
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part  
indicated by a bullet (•) for every four tools in service.  
† Indicates Tune-up Kit part.  
16574550_ed1  
5
 
1R Adjustable Cushion Clutch and Adjustable Shutoff Clutch Exploded Diagram  
NON-ROTATING FINDER  
NON-ROTATING FINDER  
(Dwg. TPA1859)  
6
16574550_ed1  
 
1R Adjustable Cushion Clutch and Adjustable Shutoff Clutch Parts List  
For 1RL, 1RP or 1RT  
Models Ending in S1 or  
S3  
For 1RA or 1RL Models  
Item Part Description  
Ending in C1 or C3  
Adjustable Clutch Attachment (with light clutch spring)  
Clutch Housing Assembly  
Clutch Housing Bushing  
Adjusting Hole Cover  
Finder Retaining Spring  
Clutch Return Spring  
Clutch Driver Assembly (with light clutch spring)  
Clutch Spring  
3C1  
3C1-A580A  
3C1-781  
3S3-415  
---  
3C3  
3S3-A580  
3S3-781  
3S3-415  
102A60-628  
---  
3S1  
3C1-A580A  
3C1-781  
3S3-415  
---  
3S3  
100  
101  
102  
103  
104  
3S3-A580  
3S3-781  
3S3-415  
102A60-628  
3S3-405  
---  
3S3-405  
3S1-A581  
3C1-A581  
3C1-A581  
3S3-A581  
105  
Light (Black)  
3S3-L583  
3S3-M583  
3S3-H583  
3C1-581  
---  
3S3-L583  
3S3-M583  
3S3-H583  
3C3-581  
---  
3S3-L583  
3S3-M583  
3S3-H583  
3S3-581  
R0BRIC-283  
3S1-211  
---  
3S3-L583  
3S3-M583  
3S3-H583  
3S3-581  
R0BRIC-283  
---  
Medium (Yellow)  
Heavy (Green)  
106  
106A  
106B  
107  
108  
109  
110  
Clutch Driver  
Clutch Driver Seal  
Clutch Driver Spacer  
---  
---  
Clutch Jaw  
3C1-589  
AV1-255  
AV1-255  
3C1-401  
3C1-627  
161A32-105  
3C1-623  
3C1-589  
AV1-255  
AV1-255  
3C1-401  
3C1-627  
161A32-105  
3C1-623  
---  
Clutch Ball (11) (1/8" diameter)  
Jaw Bearing Ball (10) (1/8" diameter)  
Clutch Ball Spacer  
---  
---  
---  
---  
---  
---  
111  
Clutch Ball Seat  
3S3-627  
161A32-105  
3C1-623  
3S3-627  
161A32-105  
3C1-623  
112  
Thrust Bearing  
113  
Clutch Spring Seat  
114  
Spring Seat Stop (3 for 3C1 or 3C3; 2 for 3S1 or 3S3  
Clutch)  
3S3-701  
3S3-701  
3S3-701  
3S3-588  
3S3-582  
3S3-625  
3S3-402  
3S3-407  
3S3-408  
R000B-263  
3S3-420  
4U-722  
AV1-255  
---  
3S3-701  
3S3-588  
3S3-582  
3S3-625  
3S3-402  
3S3-407  
3S3-408  
R000B-263  
3S3-420  
4U-722  
AV1-255  
3S3-A586 ¤  
3S3-241  
R000B-263  
---  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
128  
129  
129A  
130  
131  
132  
133  
134  
Adjusting Nut Lock  
3S3-588  
3S3-588  
Adjusting Nut  
3S3-582  
3S3-582  
Ball Retaining Ring  
---  
---  
Shutoff Collar  
---  
---  
Collar Return Spring  
---  
---  
---  
Shutoff Plunger  
---  
Shutoff Plunger Ball (4) (3/32" diameter)  
Plunger Return Spring  
Clutch Cam Ball (3) (1/4" diameter)  
Bit Holder Bearing Ball (10) (1/8" diameter)  
Bit Holder Assembly  
---  
---  
---  
---  
---  
---  
---  
---  
---  
3C3-A586  
Bit Retaining Spring  
---  
3S3-241  
---  
Bit Retaining Ball  
---  
R000B-263  
---  
Bit Holder  
3C1-586  
5C1-931-4  
5C1-853  
5C1-930-4  
RX1-629  
5C1-729  
3S3-420  
---  
---  
3S1-586 #  
5C1-931-4  
5C1-853  
5C1-930-4  
RX1-629  
5C1-729  
---  
Retaining Sleeve Spring  
Sleeve Spring Retainer (Blue)  
Bit Retaining Sleeve  
---  
---  
---  
---  
---  
---  
---  
Bit Retaining Ball (9/64" diameter)  
Bit Retaining Sleeve Stop  
Disengaging Spring  
---  
---  
---  
3S3-420  
102A60-242  
---  
Finder Spring  
---  
102A60-242  
3RP-435  
5C1-416  
5RA-69 †  
135 Push Rod  
---  
3RP-435  
5C1-416  
---  
*
*
Clutch Adjusting Key  
Bit Guide (Available for Models ending in C3 or S3)  
5C1-416  
---  
5C1-416  
5RA-69 †  
* Not illustrated.  
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part  
indicated by a bullet (•) for every four tools in service.  
† Bit Guide No. 5RA-69 is available for 1RA Models ending in C3 or S3 and Models 1RLMC3 and 1RLNC3. It is available for 1RP and 1RT Models  
ending  
in S3 and Models 1RLC3, 1RPMC3 and 1RPNC3.  
¤ Bit Holder Assembly No. 3S3-586 is included with Clutch Driver Assembly No. 3S3-A581.  
# Bit Holder No. 3S1-586 is included with Clutch Driver Assembly No. 3S1-A581.  
16574550_ed1  
7
 
1R Adjustable Cushion Clutch and Direct Drive Attachments Exploded Diagram  
NON-ROTATING FINDER  
(Dwg. TPA1860)  
8
16574550_ed1  
 
1R Adjustable Cushion Clutch and Direct Drive Attachments Parts List  
For 1RP Models  
For Models  
Ending in D1  
Item Part Description  
Ending in C1 or C3  
Adjustable Clutch Attachment (with light clutch spring)  
Clutch Housing Assembly  
P3C1  
3C1-A580A  
3C1-781  
3S3-415  
---  
P3C3  
3S3-A580A  
3S3-781  
---  
---  
---  
---  
---  
---  
---  
100  
101  
102  
103  
104  
Clutch Housing Bushing  
Adjusting Hole Cover  
Finder Retaining Spring  
Clutch Return Spring  
Clutch Driver Assembly (with light clutch spring)  
Clutch Spring  
3S3-415  
102A60-628  
3S3-405  
3S3-405  
3C1-A581  
3C1-A581  
105  
Light (Black)  
3S3-L583  
3S3-M583  
3S3-H583  
3C1-581  
3C1-589  
AV1-255  
AV1-255  
3C1-401  
3C1-627  
161A32-105  
3C1-623  
3S3-701  
3S3-588  
3S3-582  
---  
3S3-L583  
3S3-M583  
3S3-H583  
3C1-581  
3C1-589  
AV1-255  
AV1-255  
3C1-401  
3C1-627  
161A32-105  
3C1-623  
3S3-701  
3S3-588  
3S3-582  
3C3-A586  
3S3-241  
R000B-263  
---  
---  
Medium (Yellow)  
---  
Heavy (Green)  
---  
106  
107  
108  
109  
110  
111  
Clutch Driver  
---  
Clutch Jaw  
---  
Clutch Ball (11) (1/8" diameter)  
Jaw Bearing Ball (10) (1/8" diameter)  
Clutch Ball Spacer  
---  
---  
---  
Clutch Ball Seat  
---  
112  
113  
114  
115  
116  
125  
126  
127  
128  
129  
129A  
130  
131  
132  
134  
Thrust Bearing  
---  
Clutch Spring Seat  
---  
Spring Seat Stop (3)  
Adjusting Nut Lock  
---  
---  
Adjusting Nut  
---  
Bit Holder Assembly  
Bit Retaining Spring  
Bit Retaining Ball  
---  
---  
---  
---  
---  
Bit Holder  
3C1-586  
5C1-931-4  
5C1-853  
5C1-930-4  
RX1-629  
5C1-729  
---  
---  
Retaining Sleeve Spring  
Sleeve Spring Retainer (Blue)  
Bit Retaining Sleeve  
Bit Retaining Ball (9/64" diameter)  
Bit Retaining Sleeve Stop  
Finder Spring  
---  
---  
---  
---  
---  
---  
---  
---  
---  
---  
102A60-242  
3RP-435  
5C1-416  
---  
---  
135 Push Rod  
3RP-435  
5C1-416  
---  
---  
*
Clutch Adjusting Key  
---  
Direct Drive Attachment  
Screwdriver Housing Assembly  
Housing Bushing  
3DI  
150  
151  
152  
153  
154  
155  
156  
157  
---  
---  
3D1-A580  
3D1-781  
RX1-629  
5C1-729  
3D1-786  
5C1-930-4  
5C1-931-4  
5C1-853  
---  
---  
Bit Retaining Ball  
---  
---  
Bit Holder Retaining Ring (2)  
Bit Holder  
---  
---  
---  
---  
Bit Retaining Sleeve  
---  
---  
Retaining Sleeve Spring  
Sleeve Spring Retainer (Blue)  
---  
---  
---  
---  
* Not illustrated.  
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part  
indicated by a bullet (•) for every four tools in service.  
16574550_ed1  
9
 
1R Clutches For 5/16” Hexagon Shank European Style Bits Exploded Diagram  
(Dwg. TPA1861)  
10  
16574550_ed1  
 
1R Clutches For 5/16” Hexagon Shank European Style Bits Parts List  
For 1RA or  
For 1RP or  
1RT Models  
Ending in  
S9D  
For 1RP or  
Models  
Ending in  
C9D  
1RL Models  
Item Part Description  
Ending in  
C9D  
Adjustable Clutch Attachment (with Light Clutch Spring)  
Clutch Housing Assembly  
Adjusting Hole Cover  
3C9D  
3C9D-A580  
3S3-415  
3C9D-19  
---  
3S9D  
P3C9D  
100  
102  
103  
104  
3C9D-A580  
3S3-415  
3C9D-A580  
3S3-415  
Clutch Housing Cap  
3C9D-19  
3C9D-19  
Clutch Return Spring  
3S3-405  
3S3-405  
Clutch Driver Assembly (with light clutch spring)  
Clutch Spring  
3C1-A581  
3S9D-A581  
3C1-A581  
105  
Light (Black)  
3S3-L583  
3S3-M583  
3S3-H583  
3C1-581  
---  
3S3-L583  
3S3-M583  
3S3-H583  
3S3-581  
R0BR1C-283  
3S9D-211  
---  
3S3-L583  
3S3-M583  
3S3-H583  
3C1-581  
---  
Medium (Yellow)  
Heavy (Green)  
106  
106A  
106B  
107  
108  
109  
110  
111  
Clutch Driver  
Clutch Driver Seal  
Clutch Driver Spacer  
---  
---  
Clutch Jaw  
3C1-589  
AV1-255  
AV1-255  
3C1-401  
3C1-627  
161A32-105  
3C1-623  
3S3-701  
3S3-588  
3S3-582  
---  
3C1-589  
AV1-255  
AV1-255  
3C1-401  
3C1-627  
161A32-105  
3C1-623  
3S3-701  
3S3-588  
3S3-582  
---  
Clutch Ball (11) (1/8" diameter)  
Jaw Bearing Ball (10) (1/8" diameter)  
Clutch Ball Spacer  
---  
---  
---  
Clutch Ball Seat  
3S3-627  
161A32-105  
3C1-623  
3S3-701  
3S3-588  
3S3-582  
3S3-625  
3S3-402  
3S3-407  
3S3-408  
R000B-263  
3S3-420  
4U-722  
112  
113  
114  
115  
116  
117  
118  
119  
120  
121  
122  
123  
124  
125  
126  
127  
133  
Thrust Bearing  
Clutch Spring Seat  
Spring Seat Stop (3 for 3C9D and P3C9D; 2 for 3S9D)  
Adjusting Nut Lock  
Adjusting Nut  
Ball Retaining Spring  
Shutoff Collar  
---  
---  
Collar Return Spring  
---  
---  
Shutoff Plunger  
---  
---  
Shutoff Plunger Ball (4) (3/32" diameter)  
Plunger Return Spring  
Clutch Cam Ball (3) (1/4" diameter)  
Bit Holder Bearing Ball (10) (1/8" diameter)  
Bit Holder Assembly  
---  
---  
---  
---  
---  
---  
---  
AV1-255  
3S9D-A586 ¤  
3C9D-241  
AV1-255  
---  
---  
3C9D-A586  
3C9D-241  
AV1-255  
3S3-420  
---  
3C9D-A586  
3C9D-241  
AV1-255  
---  
Bit Retaining Spring  
Bit Retaining Ball  
Disengaging Spring  
135 Push Rod  
Clutch Adjusting Key  
* Not illustrated.  
3RP-435  
5C1-416  
3RP-435  
5C1-416  
*
5C1-416  
To keep downtime to a minimum, it is desirable to have on hand certain repair parts. We recommend that you stock one (pair or set) of each part  
indicated by a bullet (•) for every four tools in service.  
¤ Bit Holder Assembly No. 3S9D-A586 is included with Clutch Driver Assembly No. 3S9D-A581.  
16574550_ed1  
11  
 
Clutch Spring Selection Chart  
Model  
Torque Range (Soft Draw)  
Light Clutch Spring  
(Black)  
Medium Clutch Spring  
(Yellow)  
Heavy Clutch Spring  
(Green)  
1RALC1  
1RALC3  
1RAMC1  
1RAMC3  
1RANC1  
1RANC3  
1RAQC1  
1RLLC1  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
---  
---  
---  
---  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
---  
---  
1RLLC3  
---  
---  
1RLMC1  
1RLMC3  
1RLNC1  
1RLNC3  
1RLNS1  
1RLQS1  
1RLNS3  
1RLQS3  
1RPLC1  
1RPLC3  
1RPMC1  
1RPMC3  
1RPNC1  
1RPNC3  
1RPLS1  
1RPMS1  
1RPNS1  
1RPPS1  
1RPQS1  
1RTLS1  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
---  
---  
---  
---  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
---  
---  
1RTMS1  
1RTNS1  
1RTPS1  
1RTQS1  
1RPLS3  
1RPMS3  
1RPNS3  
1RPPS3  
1RPQS3  
1RTLS3  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
---  
---  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
3.5 to 13 in-lb (.39 to 1.5 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
---  
---  
---  
1RTMS3  
1RTNS3  
1RTPS3  
1RTQS3  
1RAMC9D  
1RANC9D  
1RLMC9D  
1RLNC9D  
1RPMC9D  
1RPNC9D  
1RPMS9D  
1RPNS9D  
1RPPS9D  
1RTMS9D  
1RTNS9D  
1RTPS9D  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 45 in-lb (.56 to 5.1 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
2.5 to 16 in-lb (.28 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
1.5 to 16 in-lb (.17 to 1.8 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
3.0 to 20 in-lb (.34 to 2.3 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
2.5 to 23 in-lb (.28 to 2.6 Nm)  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
---  
5.0 to 30 in-lb (.56 to 3.4 Nm)  
---  
12  
16574550_ed1  
 
Parts and Maintenance  
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts be separated by material so that they can be  
recycled.  
Tool repair and maintenance should only be carried out by an authorized Service Center.  
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.  
Related Documentation  
For additional information refer to:  
Product Safety Information Manual 04585006.  
Product Information Manual 80167265.  
Product Maintenance Information Manual 16575243.  
16574550_ed1  
 
13  
Notes  
14  
16574550_ed1  
 
Notes  
16574550_ed1  
15  
 
© 2006 Ingersoll-Rand Company  
 

Indesit Drill IWB 5113 User Manual
Indesit Washer Dryer WD 125 T User Manual
Init TV Video Accessories NT C3012 User Manual
Janome Sewing Machine 350E User Manual
Junxion Network Card JB 110B User Manual
Kenmore Air Cleaner 106832 User Manual
Kenwood Marine Radio TH 26A User Manual
King Canada Trimmer BB 3022 User Manual
KitchenAid Clothes Dryer KEYE664W User Manual
Kramer Electronics TV Cables VS 4X4 User Manual