Insignia Marine Instruments NS MB5200B User Manual

Quick Setup Guide NS-MB5200B

Mobile Battery Pack

PACKAGE CONTENTS

CHARGING YOUR DEVICE

•

Battery pack

Power button

USB (output)

Micro USB charging cable

Quick Setup Guide

CHARGING YOUR BATTERY PACK

LEDs

Micro USB

port (input)

Plug the USB cable into the battery pack’s USB port (output).

Plug the other end of the USB cable into your device, then

press Power.

Note: If your device requires a diﬀerent connector, use the cable

that came with your device.

CHECKING YOUR BATTERY LEVEL

Plug the charging cable into the battery pack’s micro USB port

(input).

Plug the other end of the charging cable into a USB port on your

computer, vehicle charger, or wall charger (not included). The

battery pack automatically begins charging.

Note: Recharge your battery pack when the LED blinks.

• • • • 4 LEDs = 75-100% power

• • • • 3 LEDs = 50-75% power

• • • • 2 LEDs = 25-50% power

• • • • 1 LED = 0-25% power

Blinking LED = <10% power

Before using your new product,

please read these instructions to prevent any damage.