SR870BN4
Configuration Guide
A quick reference guide to assist customers in ordering the components
necessary to configure the SR870BN4 platform
Revision 1.6
October 18, 2004
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO
LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY
RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND
CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND
INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF
INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR
A
PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR
OTHER INTELLECTUAL PROPERTY RIGHT. Intel products are not intended for use in medical, life saving, life
sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.
The SR870BN4 may contain design defects or errors known as errata which may cause the product to deviate from
published specifications. Current characterized errata are available on request.
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
1
SR870BN4 Feature Dependencies
Feature
Required Hardware for Model 0
(SBNMB000)
Required Hardware for Model 1
(SBNMB00X)
1 to 4 Processors
One processor heat sink and one power pod One processor heat sink and one power pod
for each processor, plus 1 Y-cable for each
pair of power pods.
for each processor, plus 1 Y-cable for each
pair of power pods.
Thermal Blanks needed in empty CPU slots Thermal Blanks needed in empty CPU slots
(included in Model 0). (included in Model 1).
Two memory boards (included in Model 0). Two memory boards (included in Model 1).
16 DDR DIMM slots
Memory must be installed in groups of 4
DIMMs (details on DIMM order are
provided in the product guide1).
Model 0 has 1 power supply. A 2nd power
supply must be added if redundancy is
needed (only redundant at 200V – 240V).
Three SCSI drive carriers are included in
Model 0. Requires ½ inch height (slim
line), 3.5 inch SCSI drives. See Intel’s list
of supported drives1.
Memory must be installed in groups of 4
DIMMs (details on DIMM order are
provided in the product guide1).
Model 1 has 2 power supplies for
redundancy at 200V – 240V.
Redundant Power Supplies
3 Hot Plug SCSI disk drives
Three SCSI drive carriers are included in
Model 1. Requires ½ inch height (slim line),
3.5 inch SCSI drives. See Intel’s list of
supported drives1.
Embedded Network
Controller (NIC)
IDE Devices
Model 0 contains onboard controller with 1
Ethernet port.
Model 1 contains onboard controller with 1
Ethernet port.
See Intel’s list of supported drives1.
Model 1 includes (1) DVD ROM device.
See Intel’s list of supported drives1.
SR870BN4 - Power Subsystem Supported Features
The SR870BN4 Model 0 comes with 1 power supply, which is sufficient for any configuration of
processors, memory and I/O devices possible at 200V – 240V, but does not provide redundancy. A filler
panel must be installed in systems using only 1 power supply
The SR870BN4 Model 1 comes with 2 power supplies, which is sufficient for any configuration of
processors, memory and I/O devices possible at 200V – 240V and provides redundancy.
The DC to DC (D2D) converters needed for the maximum system configuration are as follows:
•
•
Two 5V DC to DC converters (standard on Model 0 and Model 1)
Five 2.5/3.3V DC to DC converter (standard on Model 0 and Model 1)
1 See “Reference Information” section on page 8 for details on available documents
1 See “Reference Information” section on page 8 for details on available documents
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
3
Base System Configuration Guide
SBNMB000
MM# 860136
1. “Model 0” Base Systems are configured with the following:
1 Chassis (4U, Rack Mount)
1 Processor Baseboard (includes: 1 Y Cable and 4 sockets for Itanium® 2 processor, Madison and
Montecito processors)
2 Memory Boards (2 x 8 DRR RAM DIMM sockets, 32GB total memory capacity)
1 I/O Baseboard with 8 PCI slots, on-board Ultra 320 SCSI controller
1 I/O Riser board with 4M of FLASH ROM, Baseboard Management Controller (BMC), Ports (4
USB, 1 Serial, 1 Video), and 10/100/1000 Intel 82540EM Ethernet Embedded Network Controller
1 Power Distribution Board
1 SCSI Hot Swap Backplane
1 Midplane Board
1 Front Panel Board
1 1200 W Power Supply
5 2.5 / 3.3V DC to DC Converters
2 5V DC to DC Converters
2 1” Fans
2 1.5” Fans
3 SCSI Disk Drive Carriers
1 Front Bezel, 1 P-Bay Bezel (color: Raven Black)
1 Resource Kit containing the following on CDROM: Documents: Product Guide and Product
Quick Start Guide; Utilities: SDR Viewer, SEL Viewer, FRU/SDR Loader, System Maintenance
Utility (SMU), EFI Platform Diagnostics, EFI Configuration Tool, and LSI Logic SCSI Driver for
Linux† (64-bit) and Windows† .NET
2. They do NOT contain the following necessary items:
Processors
Processor heat sinks
Processor Power Pods
External Power Cords
Rack Mount Slide Rail Kit
Hard Disk Drives
Memory
3. To order your necessary items use the following table:
Product Codes
MM#
Min
Order
Qty
1
Description
ATG13G3MCPUHS
ATG14G4MCPUHS
ATG15G6MCPUHS
BX80543KC1500H
BX80543KC1600J
BX80543KC1600K
855100
855101
855102
864776
864770
867433
Processor / Heat Sink Kit (includes: 1.3GHz / 3MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.4GHz / 4MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.5GHz / 6MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.5GHz / 4MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.6GHz / 6MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.6GHz / 9MB cache Itanium
2 processor with heat sink attached)
1
1
1
1
1
ATGPPOD
ATGRAILKIT
Hard Disk Drives
848769
848491
N/A
1
1
N/A
Power Pod with Y cable
Rackmount Slide Rail Kit for standard EIA compliant 19” inch rack
OEMs purchase these directly from vendors. See Intel’s list of
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
4
supported drives1
N/A
N/A
OEMs purchase these directly from vendors. See Intel’s list of
Memory
qualified memory DIMMs1.
4. Additional accessories that may be desirable for your configuration are:
Product Codes
MM#
Min
Description
Order
Qty
ATG1200PS
848745
852744
848497
848590
848874
1
1
1
1
Power Supply, 1200W, PFC, 48V and 12V outputs, hot swap
Panasonic * DVDROM drive, Adapter Board & Carrier
Slim Line CDROM/DVD Adaptor Board & Carrier, no drive1
External SCSI Cable & Connector
ATGDVDROMKIT
ATGCDDVDCAR
ATGSCSICC
ATGRAIDCBL
1
RAID Cable for External Drives
Small Parts Kit (includes: spare CPU thermal blank, insertion
extraction mechanisms, PCI slot dividers, PCIX IO baseboard
protective cover, Hot Plug manually operated retention latches,
power supply filler panel, and screws)
ATGSMLPRTSKIT
848629
1
1 See “Reference Information” section on page 8 for details on available documents
1 See “Reference Information” section on page 8 for details on available documents
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
5
Integrated System Configuration Guide
SBNMB000X
MM# 860137
1. Integrated Systems are configured with the following:
1 Chassis (4U, Rack Mount)
1 Processor Baseboard (includes: 1 Y Cable and 4 sockets for Itanium® 2 processor, Madison and
Montecito processors)
2 Memory Boards (2 x 8 DRR RAM DIMM sockets, 32GB total memory capacity)
1 I/O Baseboard with 8 PCI slots, on-board Ultra 320 SCSI controller
1 I/O Riser board with 4M of FLASH ROM, Baseboard Management Controller (BMC), Ports (4
USB, 1 Serial, 1 Video), and 10/100/1000 Intel 82540EM Ethernet Embedded Network Controller
1 Power Distribution Board
1 SCSI Hot Swap Backplane
1 Midplane Board
1 Front Panel Board
2 1200 W Power Supply
Note - differences from the
5 2.5 / 3.3V DC to DC Converters
2 5V DC to DC Converters
2 1” Fans
Base System Configuration
Guide (SBNMB000 Model 0)
are bold and underlined
2 1.5” Fans
3 SCSI Disk Drive Carriers
1 Front Bezel, 1 P-Bay Bezel (color: Raven Black)
1 Rack Mount Slide Rail Kit
1 Slim Line DVD IDE Device
1 External SCSI Cable & Connector
1 RAID Cable for External Drives
1 Resource Kit containing the following on CDROM: Documents: Product Guide and Product
Quick Start Guide; Utilities: SDR Viewer, SEL Viewer, FRU/SDR Loader, System Maintenance
Utility (SMU), EFI Platform Diagnostics, EFI Configuration Tool, and LSI Logic SCSI Driver for
Linux† (64-bit) and Windows† .NET
2. They do NOT contain the following necessary items:
Processors
Processor heat sinks
Processor Power Pods
External Power Cords
Hard Disk Drives
Memory
3. To order your necessary items use the following table:
Product Codes
MM#
Min
Order
Qty
1
Description
ATG13G3MCPUHS
ATG14G4MCPUHS
ATG15G6MCPUHS
855100
855101
855102
Processor / Heat Sink Kit (includes: 1.3GHz / 3MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.4GHz / 4MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.5GHz / 6MB cache Itanium
2 processor with heat sink attached)
1
1
BX80543KC1500H
864776
1
Processor / Heat Sink Kit (includes: 1.5GHz / 4MB cache Itanium
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
6
2 processor with heat sink attached)
BX80543KC1600J
BX80543KC1600K
864770
867433
1
1
Processor / Heat Sink Kit (includes: 1.6GHz / 6MB cache Itanium
2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.6GHz / 9MB cache Itanium
2 processor with heat sink attached)
ATGPPOD
Hard Disk Drives
848769
N/A
1
N/A
Power Pod with Y cable
OEMs purchase these directly from vendors. See Intel’s list of
supported drives1
N/A
N/A
OEMs purchase these directly from vendors. See Intel’s list of
qualified memory DIMMs1.
Memory
4. Additional accessories that may be desirable for your configuration are:
Product Codes
MM#
Min
Order
Qty
Description
Small Parts Kit (includes: spare CPU thermal blank, insertion
extraction mechanisms, PCI slot dividers, PCIX IO baseboard
protective cover, Hot Plug manually operated retention latches,
power supply filler panel, and screws)
ATGSMLPRTSKIT
848629
1
1 See “Reference Information” section on page 8 for details on available documents
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
7
Reference Documentation Information
1. SR870BN4 Hardware and Operating System Validation Test List Plan – contains a prioritized list
of operating systems and adapter cards Intel plans to validate. Available on IBL.
2. SR870BN4 System Enabling Components Document – includes component descriptions, functions,
part numbers, and vendor contacts for heat sinks, power supplies, power pods, Y cable, power cables, DC
to DC converters, and bezels. Available on IBL.
3. SR870BN4 Product Guide – provides detailed information on board and system component
descriptions and features, SW and utility configurations, hot swappable system components, servicing, and
technical reference guide. Provided with Model 0 and Model 1 systems, and also available on IBL.
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
8
SR870BN4 SKU List
Product Code
MM#
Description
Minimum
Order
Qty
1
1
860136
860137
Model 0 System (see page 4 for details)
Integrated System (see page 6 for details)
Systems
Boards
SBNMB000
SBNMB000X
865351
857680
857654
865257
865145
848668
CPU Board
Memory Board
I/O Board
I/O Riser Board
Hot Swap SCSI Backplane Board
Passive Midplane Board
Hot Plug Indicator Board (w/ chassis ID LED &
insulation for PCI slots), does not include cable
Front Panel Board (w/chassis ID LED & illuminated
On/Off switch)
1
1
1
1
1
1
1
BBACPUBOARD
BBADDRMEM1GB
BBAIOBOARD
BBARFRECH4
BBASCSIHSBP
BBAMIDPLANE
848666
BBAHPIBBOARD
1
848802
848663
BBAFPNL
BBAPDB
Power Distribution Board
1
1
1
Power Supply, 1200W, PFC, 48V and 12V outputs,
hot swap
848745
855100
Accessories
ATG1200PS
Processor / Heat Sink Kit (includes: 1.3GHz / 3MB
cache Itanium 2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.4GHz / 4MB
cache Itanium 2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.5GHz / 6MB
cache Itanium 2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.5GHz / 4MB
cache Itanium 2 processor with heat sink attached)1
Processor / Heat Sink Kit (includes: 1.6GHz / 6MB
cache Itanium 2 processor with heat sink attached)
Processor / Heat Sink Kit (includes: 1.6GHz / 9MB
cache Itanium 2 processor with heat sink attached)
Power Pod with Y Cable
1
1
1
1
1
1
ATG13G3MCPUHS
855101
855102
864776
864770
867433
ATG14G4MCPUHS
ATG15G6MCPUHS
BX80543KC1500H
BX80543KC1600J
BX80543KC1600K
848769
848486
848488
848497
1
1
ATGPPOD
DC to DC Converter, 2.5 / 3V (VID, 3 Per CPU Bd, 2
Per I/O Bd ), Rev. S3
DC to DC Converter, 5V (2 per I/O Bd), Rev. S3
Slim Line CDROM/DVD Adaptor Board & Carrier,
no drive
ATGD2D3VS3
ATGD2D5VS3
ATGCDDVDCAR
1
1
848499
848590
848491
848726
848629
Slim Line HDD carrier, no drive
External SCSI Cable and Connector
Rackmount Slide Rail Kit
Resource Kit (see page 4 for details)
1
1
1
1
1
ATGHDCARTORX
ATGSCSICC
ATGRAILKIT
ATGCOUNTKIT
ATGSMLPRTSKIT
Small Parts Kit (see page 7 for details)
848905
848847
848724
848723
848493
848593
848874
848600
Chassis (sheet metal kit, no boards)
1” Fan
1.5” Fan
CPU / Memory Module Carrier, no boards
Front Bezel (color: Raven Black)
P-Bay Bezel (color: Raven Black)
RAID Cable for External Drives
Internal AC cable
1
1
1
1
1
1
1
1
1
Spares
ATGSHEETMTL
ATG10FAN
ATG15FAN
ATGCPUMOD
ATGFBZL
ATGPBAYBZL
ATGRAIDCBL
ATGACCBL
Cable kit (internal Hot Plug Indicator Board, Power
POD, Y Cables), does not include AC Cable
848805
ATGCBLKIT
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
9
Small Parts Kit Content
ATGSMLPRTSKIT MM# 848629
Quantity
Item
2
2
2
1
1
2
2
3
2
2
2
2
2
1
1
1
1
1
1
Shoulder Screw, Insert/Extract Mechanism
Insertion / Extraction Mechanism, Left
Insertion / Extraction Mechanism, Right
Insertion / Extraction P-Bay Mechanism, Left
Insertion / Extraction P-Bay Mechanism, Right
PCI Divider – Short
PCI Divider – Long
Hot Plug Manually Operated Retention Latches
Locking Card Guide
PCI Filler Panel
PCI EMI Shield
EMI Clip – Small
EMI Clip – Large
Insertion / Extraction Collar
SCSI Backplane Captive Fastener
PDB / CPU Board Captive Fastener
AC Power Cord Strain Relief
Processor / Power Pod Thermal Blank
Power Supply Filler Panel
Copyright © Intel Corporation 2004.
*Other brands and names are the property of their respective owners.
10
|