Kramer Electronics Car Satellite TV System TP 305A User Manual

Kramer Electronics, Ltd.  
Preliminary  
USER MANUAL  
Model:  
TP-305A  
UXGA – Audio – RS-232 Line Receiver/DA  
 
Introduction  
1
Introduction  
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been  
providing a world of unique, creative, and affordable solutions to the vast  
range of problems that confront the video, audio, presentation, and  
broadcasting professional on a daily basis. In recent years, we have  
redesigned and upgraded most of our line, making the best even better! Our  
1,000-plus different models now appear in 11 groups1 that are clearly  
defined by function.  
Thank you for purchasing the Kramer TP-305A UXGA - Audio - RS-232  
Line Receiver/DA, which is ideal for:  
Presentation and multimedia applications  
Long range graphics distribution for schools, hospitals, security, and  
stores  
The package includes the following items:  
TP-305A UXGA - Audio - RS-232 Line Receiver/DA  
Power supply (12V DC)  
This user manual2  
2
Getting Started  
We recommend that you:  
Unpack the equipment carefully and save the original box and  
packaging materials for possible future shipment  
Review the contents of this user manual  
Use Kramer high performance high-resolution cables3  
1
GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;  
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;  
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;  
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products  
2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com  
3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com  
1
 
           
Getting Started  
2.1 Quick Start  
This quick start chart summarizes the basic setup and operation steps of the  
TP-305A.  
Step 1: Connect the input and the outputs - see section 5  
TP-305A  
2
LINE  
I
1
N
UXGA  
OUT  
3
1
2
3
4
5
LINE  
O
UTPUTS  
1
AUDIO  
ANALOG  
O
U
T
S/PDIF  
RS-232  
TP-123  
12V DC  
GT  
x
T P - 1 2 3  
STP Cable  
Range up to  
300ft (100m)  
T r a n s m i t t e r  
L i n e  
D a t a  
/
A u d i o  
/
TP-124  
XG
IN  
X G A  
STP Cable  
Range up to  
300ft (100m)  
T P - 1 2 4  
L
GND  
INE  
RXD  
U
T
STP Cable  
Range up to  
300ft (100m)  
2  
R e c e i v e r  
L i n e  
A
I
UDIO  
N
D a t a  
/
12V  
Audio  
DC  
XG
A u d i o  
/
X G A  
T P - 1 2 4  
L
I
GND  
INE  
TXD  
TP-124  
N
A
NALOG  
S/PDIF  
R e c e i v e r  
L i n e  
A
UDI
D a t a  
/
U
T
X
A u d i o  
/
12V  
O
DC  
X G A  
L
GND  
INE  
TXD  
VGA  
N
A
NALOG  
RS-232  
S/PDIF  
A
UDIO  
U
T
12V  
DC  
VGA  
RS-232  
Audio  
Computer Graphics /  
Audio /  
RS-232 Control  
Plasma  
Display  
Plasma  
Display  
AV-Receiver  
Plasma  
Display  
Connect the UXGA video and audio outputs, and the RS-232 port (if required)  
to the TP-123 transmitter  
1
Connect the TP-123 transmitter to the TP-305A via CAT 5  
Connect the TP-305A to up to five TP-124 receivers via CAT 5  
2
3
Step 22: Sett the undersside sswitchees - see section 5  
Set the Hs and Vs  
polarity switches  
Step 3: Connect the power  
KRAMER: SIMPLE CREATIVE TECHNOLOGY  
2
 
   
Overview  
3
Overview  
The TP-305A UXGA - Audio - RS-232 Line Receiver/DA receives a CAT 5  
signal from a transmitter1 and distributes it to up to five other receivers (via  
CAT 5 cables). The TP-305A also decodes the CAT 5 signal and distributes  
it to a UXGA output, an analog audio output, a digital audio output and an  
RS-232 output.  
The TP-305A serves as a power center that can distribute power to both the  
transmitter and the connected receivers (see section 3.1).  
In particular, the TP-305A features:  
Resolution of up to UXGA  
UXGA output on a 15-pin HD computer graphics video connector  
Digital audio output (S/PDIF) on an RCA connector and an analog  
audio output on a 3.5mm mini jack  
A transmission range of up to 300ft (up to 100 meters) over STP  
cabling  
Changeable polarity of the encoded H and V Sync for video (UXGA)  
EQ. and LEVEL controls for the video (UXGA) output  
To achieve the best performance:  
Use only good quality connection cables2 to avoid interference,  
deterioration in signal quality due to poor matching, and elevated noise  
levels (often associated with low quality cables).  
Avoid interference from neighboring electrical appliances that may  
adversely influence signal quality and position your Kramer TP-305A  
away from moisture, excessive sunlight and dust  
1 For example, the Kramer TP-121, TP-123 or TP-45  
2 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com  
3
 
       
Overview  
3.1 About the Power Connect Feature  
The Power Connect feature applies as long as the cable can carry power.  
This feature is available when using STP cable and the distance does not  
exceed 50m on standard CAT 5 cable. For longer distances, heavy gauge  
cable should be used1. For units which are connected via RJ-45 connectors,  
make sure that the shield of the STP cable is connected to the metal casing  
of the connectors on both ends of the cable. For units which are connected  
via terminal block connectors, the shield of the STP cable must be  
connected to a ground terminal on the units at both ends (use the ground  
terminal of the power supply connection if necessary).  
For a CAT 5 cable exceeding a distance of 50m, separate power supplies  
should be connected to the transmitter and to the receiver simultaneously.  
3.2 Shielded Twisted Pair (STP)/Unshielded Twisted Pair (UTP)  
We recommend that you use Shielded Twisted Pair (STP) cable. There are  
different levels of STP cable available, and we advise you to use the best  
quality STP cable that you can afford. Our non-skew-free cable, Kramer  
BC-STP is intended for analog signals where skewing is not an issue. For  
cases where there is skewing, our UTP skew-free cable, Kramer BC-XTP,  
may be used. Bear in mind, though, that we advise using STP cables where  
possible, since the compliance to electromagnetic interference was tested  
using those cables.  
Although Unshielded Twisted Pair (UTP) cable might be preferred for long  
range applications, the UTP cable should be installed far away from electric  
cables, motors and so on, which are prone to create electrical interference.  
However, since the use of UTP cable might cause inconformity to  
electromagnetic standards, Kramer does not commit to meeting the standard  
with UTP cable.  
1 CAT 5 cable is still suitable for the video/audio transmission, but not for feeding the power at these distances  
KRAMER: SIMPLE CREATIVE TECHNOLOGY  
4
 
       
Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA  
4
Your TP-305A UXGA - Audio - RS-232 Line Receiver/DA  
Figure 1 and Table 1 define the TP-305A:  
Figure 1: TP-305A UXGA - Audio - RS-232 Line Receiver/DA  
Table 1: TP-305A UXGA - Audio - RS-232 Line Receiver/DA Features  
#
Feature  
POWER Switch  
Function  
1
2
3
Illuminated switch for turning the unit ON or OFF  
LINK LED  
Lights when receiving a valid input signal  
EQ.1 Trimmer  
Adjusts2 the cable compensation (equalization) level for the  
UXGA output  
4
5
6
7
LEVEL Trimmer  
Adjusts2 the output signal level for the UXGA output  
Connect to the LINE OUT connector of a transmitter3  
LINE IN RJ-45 Connector  
UXGA OUT 15-pin HD Connector Connect to the video acceptor  
LINE OUTPUT RJ-45 Connectors Connect to4 the LINE IN RJ-45 connector on a receiver5 (from 1  
to 5)  
8
9
AUDIO OUT  
ANALOG 3.5mm Connect to the stereo analog audio acceptor 1  
Mini Jack  
S/PDIF RCA  
Connector  
Connect to the digital audio acceptor 1  
10 RS-232 G, Tx Terminal Block  
Connect the connector (G and Tx) to control a device (see  
section 5.3)  
11 Power Connector with Fuse  
AC connector enabling power supply to the unit  
1 Degradation and VGA/XGA signal loss can result from using long cables (due to the effects of stray capacitance, for  
example), sometimes leading to a loss of sharpness in high-resolution signals  
2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level  
3 The PINOUT is defined in Table 3 and Figure 5  
4 Using UTP or STP cable with RJ-45 connectors at both ends (the PINOUT is defined in Table 3 and Figure 5)  
5 For example, the Kramer TP-124 or TP-46  
5
 
                   
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA  
4.1 The TP-305A UXGA - Audio - RS-232 Line Receiver/DA  
Underside  
Figure 2 and Table 2 define the underside of the TP-305A  
Figure 2: TP-305A Underside  
Table 2: Features of the TP-305A Underside  
Feature  
Function  
VS Switch1  
Slide the switch down, to set the V SYNC to its input polarity (NORMAL)  
Slide the switch up, to set the VS to negative polarity (INVERT)  
HS Switch1  
Slide the switch down, to set the HS to its input polarity (NORMAL)  
Slide the switch up, to set the HS to negative polarity (INVERT)  
5
Connecting the TP-305A UXGA-Audio-RS-232 Line  
Receiver/DA  
You can use the TP-305A with a UXGA - Audio - RS-232 Line Receiver/DA  
such as the Kramer TP-1232. You can connect a single TP-305A to up to five  
receivers, and up to five TP-305A units can be connected to increase the  
number of outputs to 25.  
5.1 Connecting a Single TP-305A  
To connect a TP-123/TP-305A UXGA – Audio - RS-232/Line  
Receiver/DA system3 as illustrated in the example in Figure 3, do the  
following4:  
1. On the TP-305A, connect the:  
ƒ UXGA OUT 15-pin HD computer graphics video connector to the  
UXGA acceptor (for example, a plasma display), and the AUDIO  
OUT ANALOG 3.5mm mini jack connector to the analog audio  
connector on the acceptor. If required, connect the RS-232 G and  
TX terminal block connector to the RS-232 port on the acceptor  
ƒ LINE OUTPUT RJ-45 connector on the TP-123 to the LINE IN  
1 By default, both switches are set to NORM.  
2 Refer to the separate user manual, which can be downloaded at: http://www.kramerelectronics.com  
3 Using up to 300ft (100m) of UTP cabling  
4 Switch OFF the power on each device before connecting it to your TP-305A. After connecting your TP-305A, switch on its  
power and then switch on the power on each device  
KRAMER: SIMPLE CREATIVE TECHNOLOGY  
6
 
                     
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA  
RJ-45 connector on the TP-305A, via STP cabling (with a range of  
up to 300ft (up to100m)), see section 3.2  
2. On the TP-123, connect:  
ƒ A UXGA source (for example, the graphics card of a laptop) to the  
XGA IN 15-pin HD computer graphics video connector and an  
audio source to the Audio IN 3.5mm mini jack, for example, using  
a Kramer C-GMA/GMA cable (VGA HD15M +Audio jack to  
VGA HD15M +Audio jack)1  
ƒ An RS-232 cable with a 9-pin D-sub connector at one end to the  
laptop, and a 2-PIN terminal block connector at the other end to  
the TP-123 RS-232 port  
3. Connect the LINE OUTPUT CAT 5 connectors as follows2:  
ƒ The LINE OUTPUT 1 RJ-45 connector on the TP-305A to the  
LINE IN RJ-45 connector on a TP-1243 unit via STP cabling4  
(with a range of up to 300ft (up to 100m))5  
ƒ The LINE OUTPUT 5 RJ-45 connector on the TP-305A to the  
LINE IN RJ-45 connector on another TP-1243 unit, via STP  
cabling4 (with a range of up to 300ft (up to 100m))  
4. Connect the 12V DC power adapter to the power socket and connect the  
adapter to the mains electricity.  
5. If necessary, set the HS and VS switches6 on the underside.  
1 Not supplied. The full list of Kramer cables is on our Web site at http://www.kramerelectronics.com. Alternatively, you can  
connect an XGA source to the XGA IN 15-pin HD connector, and a separate audio source to the AUDIO IN 3.5mm mini jack  
2 You do not have to connect all the outputs  
3 Refer to the separate user manual, which can be downloaded at http://www.kramerelectronics.com  
4 For details of how to wire a CAT 5 LINE IN/LINE OUT RJ-45 connector, see section 5.3  
5 The TP-46 is connected to an additional TP-46 unit for transmitting the signal further  
6 By default, both switches are set down (for normal V SYNC and H SYNC polarity)  
7
 
             
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA  
TP-305A  
LINE  
I
N
UXGA  
OUT  
1
2
3
4
5
LINE  
O
UTPUTS  
AUDIO  
ANALOG  
O
U
T
S/PDIF  
RS-232  
TP-123  
12V DC  
GT  
x
T P - 1 2 3  
STP Cable  
Range up to  
300ft (100m)  
T r a n s m i t t e r  
L i n e  
D a t a  
/
A u d i o  
/
TP-124  
X
IN  
X G A  
STP Cable  
Range up to  
300ft (100m)  
T P - 1 2 4  
L
GND  
INE  
RXD  
U
T
STP Cable  
Range up to  
300ft (100m)  
R e c e i v e r  
L i n e  
A
I
UDIO  
N
D a t a  
/
12V  
Audio  
DC  
X
A u d i o  
/
O
X G A  
T P - 1 2 4  
L
GND  
INE  
TXD  
TP-124  
N
A
NALOG  
S/PDIF  
R e c e i v e r  
L i n e  
A
UDI
D a t a  
/
U
T
X
A u d i o  
/
12V  
O
DC  
X G A  
L
GND  
INE  
TXD  
VGA  
N
A
NALOG  
RS-232  
2  
S/PDIF  
A
UDIO  
U
T
12V  
DC  
VGA  
RS-232  
Audio  
Computer Graphics /  
Audio /  
RS-232 Control  
Plasma  
Display  
Plasma  
Display  
AV-Receiver  
Plasma  
Display  
Figure 3: Connecting the TP-305A UXGA - Audio - RS-232 Line Receiver/DA  
5.2 Connecting Several TP-305A Units  
You can connect up to five additional TP-305A units via the LINE  
OUTPUT RJ-45 connectors on the first unit. The number of TP-305A units  
that can be connected depends upon the quality of the input signal that you  
require and the distance between the machines.  
In the example illustrated in Figure 4, a TP-305A unit is connected to three  
additional TP-305A units via the LINE OUTPUT RJ-45 connectors. Each  
of the three connected TP-305A units can distribute the signal to five  
receivers. The system, in total, distributes the signal to 17 receivers.  
To connect an expanded UXGA – Audio Line Receiver/DA system, do the  
following:  
1. Connect a transmitter to the LINE IN RJ-45 connector of the first TP-305A.  
2. Connect the LINE OUTPUT 1 RJ-45 connector of the first TP-305A to the  
LINE IN RJ-45 connector of the second TP-305A.  
KRAMER: SIMPLE CREATIVE TECHNOLOGY  
8
 
     
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA  
3. Connect the LINE OUTPUT 2 RJ-45 connector of the first TP-305A to the  
LINE IN RJ-45 connector of the third TP-305A.  
4. Connect the LINE OUTPUT 3 RJ-45 connector of the first TP-305A to the  
LINE IN RJ-45 connector of the fourth TP-305A.  
5. Connect the LINE OUTPUT RJ-45 connectors of each TP-305A unit, to  
the LINE IN RJ-45 connectors of the appropriate receivers, as illustrated in  
6. On each TP-305A unit, connect the 12V DC power adapter to the power  
socket and connect the adapter to the mains electricity.  
Transmitter  
TP-305A  
TP-46  
TP-46  
TP-305A  
...  
...  
...  
TP-122  
TP-122  
TP-122  
TP-124  
TP-305A  
TP-124  
TP-305A  
TP-124  
Figure 4: Distributing the Signal to 17 Receivers  
9
 
   
Connecting the TP-305A UXGA-Audio-RS-232 Line Receiver/DA  
5.3 Wiring the CAT 5 LINE IN / LINE OUT RJ-45 Connectors  
Table 3 and Figure 5 define the UTP CAT 5 PINOUT, using a straight pin  
to pin cable with RJ-45 connectors:  
Figure 5: CAT 5 PINOUT  
Table 3: CAT 5 PINOUT  
EIA /TIA 568A  
EIA /TIA 568B  
PIN  
Wire Color  
PIN  
Wire Color  
1
Green / White  
Green  
1
Orange / White  
Orange  
2
3
4
5
6
7
8
2
3
4
5
6
7
8
Orange / White  
Blue  
Green / White  
Blue  
Blue / White  
Orange  
Blue / White  
Green  
Brown / White  
Brown  
Brown / White  
Brown  
Pair 1  
Pair 2  
Pair 3  
Pair 4  
4 and 5  
3 and 6  
1 and 2  
7 and 8  
Pair 1  
Pair 2  
Pair 3  
Pair 4  
4 and 5  
1 and 2  
3 and 6  
7 and 8  
5.4 Wiring the RS-232 Connector  
Prepare an RS-232 cable with a 9-pin D-sub connector at one end, and a 2-pin  
terminal block connector at the other end, as defined in Figure 6 and Table 4:  
Table 4: RS-232 PINOUT Connection  
RS-232 to TP-305A  
PIN 5 Connected to GND  
Attach the 9-pin  
D-sub Connector  
To the Terminal Block  
Connector PIN:  
PIN 3 Connected to RxD  
PIN 3  
PIN 5  
TX (1 and 2)  
G
5
4
3
G
9
8
7
6
2
1
TX  
To PC (9-pin D-sub)  
Figure 6: RS-232 PINOUT  
Connection  
KRAMER: SIMPLE CREATIVE TECHNOLOGY  
10  
 
             
Technical Specifications  
6
Technical Specifications  
Table 5 includes the technical specifications1 of the TP-305A:  
Table 5: Technical Specifications of the TP-305A  
1 LINE IN on an RJ-45 connector  
INPUT:  
OUTPUTS:  
5 LINE OUT on RJ-45 connectors  
1 UXGA video output on a 15-pin HD connector  
1 audio output on a 3.5mm mini jack connector  
1 S/PDIF output on an RCA connector  
1 2-pin terminal block for 1 RS-232 TxD out line  
MAX. OUTPUT LEVEL:  
POWER OUTPUTS:  
RESOLUTION:  
Video: 1.6V; Audio: 2.3V  
12V DC 0.5A max via each RJ-45 output (pins 4, 5)  
WUXGA & 1080p  
BANDWIDTH:  
20Hz to 20kHz @1dB (audio)  
48kHz  
SAMPLING RATE FOR S/PDIF:  
S/N RATIO:  
Audio: >75dB  
TOTAL GAIN:  
Audio:  
Analog/analog: 0dB  
Analog/SPDIF: –12dBFS  
TND+N:  
Audio: <0.02%  
POWER SOURCE:  
DIMENSIONS:  
WEIGHT:  
12V DC, 2.3A  
21.46cm x 16.25cm x 4.36cm (8.45" x 6.4" x 1.72") W, D, H  
1.3kg (2.9lbs) approx.  
Power cord2  
ACCESSORIES:  
OPTIONS:  
RK-1 19" rack adapter  
1 Specifications are subject to change without notice  
2 We recommend that you use only the power cord that is supplied with this machine  
11  
 
         
LIMITED WARRANTY  
Kramer Electronics (hereafter Kramer) warrants this product free from defects in material and workmanship under the  
following terms.  
HOW LONGIS THE WARRANTY  
Labor and parts are warranted for seven years from the date of the first customer purchase.  
WHOIS PROTECTED?  
Only the first purchase customer may enforce this warranty.  
WHATISCOVEREDANDWHATISNOTCOVERED  
Except as below, this warranty covers all defects in material or workmanship in this product. The following are not covered  
by thewarranty:  
1. Any product which is not distributed by Kramer, or which is not purchased from an authorized Kramer dealer. If you are  
uncertain as to whether a dealer is authorized, please contact Kramer at one of the agents listed in the Web site  
2. Any product, on which the serial number has been defaced, modified or removed, or on which the WARRANTY VOID  
IFTAMPERED stickerhasbeen torn, reattached, removed orotherwiseinterferedwith.  
3. Damage, deterioration or malfunction resultingfrom:  
i) Accident, misuse, abuse, neglect, fire, water, lightning or otheractsofnature  
ii) Product modification, orfailure to follow instructions supplied withtheproduct  
iii) Repairorattemptedrepairby anyonenot authorizedbyKramer  
iv) Anyshipment oftheproduct(claimsmust be presentedtothecarrier)  
v) Removalorinstallation oftheproduct  
vi) Anyothercause, whichdoes not relateto aproduct defect  
vii) Cartons, equipment enclosures, cables oraccessories usedinconjunction with theproduct  
WHAT WE WILLPAYFORANDWHATWEWILLNOT PAYFOR  
We will pay labor and material expenses forcovered items.Wewill not pay forthe following:  
1. Removal orinstallationscharges.  
2. Costs of initial technical adjustments (set-up), including adjustment of user controls or programming. These costs are the  
responsibility oftheKramer dealer fromwhomtheproduct waspurchased.  
3. Shippingcharges.  
HOW YOU CAN GET WARRANTY SERVICE  
1. To obtain service on you product, you must take or ship it prepaid to any authorized Kramer service center.  
2. Whenever warranty service is required, the original dated invoice (or a copy) must be presented as proof of warranty  
coverage, and should be included in any shipment of the product. Please also include in any mailing a contact name,  
company, address, and a description of the problem(s).  
3. For the name of the nearest Kramer authorized service center, consult your authorized dealer.  
LIMITATION OFIMPLIED WARRANTIES  
All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to  
the length of this warranty.  
EXCLUSIONOFDAMAGES  
The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall  
not beliablefor:  
1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss  
oftime, commercialloss; or:  
2. Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on howlong an  
implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitations andexclusions maynot applytoyou.  
Thiswarranty gives you specificlegal rights, andyou may also haveother rights, whichvary fromplace toplace.  
NOTE:Allproducts returned toKramer for service musthaveprior approval.Thismaybeobtainedfromyourdealer.  
Thisequipment has been testedto determinecompliancewiththerequirements of:  
EN-50081:  
"Electromagnetic compatibility(EMC);  
genericemissionstandard.  
Part 1: Residential, commercial and light industry"  
"Electromagnetic compatibility(EMC) generic immunity standard.  
Part 1: Residential, commercial and light industryenvironment".  
FCC Rules and Regulations:  
EN-50082:  
CFR-47:  
Part 15: “Radio frequency devices  
Subpart B Unintentional radiators”  
CAUTION!  
Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or  
modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the  
equipment.  
UsethesuppliedDCpowersupply tofeed power to themachine.  
Pleaseuserecommended interconnection cablesto connect themachineto other components.  
KRAMER: SIMPLE CREATIVE TECHNOLOGY  
12  
 
For the latest information on our products and a list of Kramer  
where updates to this user manual may be found.  
We welcome your questions, comments and feedback.  
Safety Warning:  
Disconnect the unit from the power supply before  
opening/servicing.  
Caution  
2900-000365  
3
P/N:  
Rev:  
Kramer Electronics, Ltd.  
P/N: 2900-000365 REV 3  
 

Ingersoll Rand Water Pump PD30X X User Manual
Insignia TV DVD Combo NS 32LD120A13 User Manual
Intel Computer Hardware S3420GP User Manual
IOGear Switch GUH274 User Manual
ITT Telephone EKS 701 User Manual
Jenn Air Gas Grill 720 0063 LP User Manual
JVC CD Player KD G407 User Manual
JVC CD Player XM EX90 User Manual
Kenmore Vacuum Cleaner 11636722 User Manual
Kodak Printer ESP 7200 User Manual